Zebra GK420t Guide de l'utilisateur télécharger pdf (Page 11)

COBISS System Management Zebra GK420t User Guide

Figure 13 : Final loading of the black ribbon cartridge

2.5 Resetting printer

Once the media roll is placed and the black ribbon cartridge loaded, go through the following

steps (make sure that the printer’s cover is closed and the status light is green):

1. Turn off the printer.

2. Press and hold the FEED button.

3. Turn on the printer.

4. The green status light flashes in sequences: once, then in the two-flash-, three-flash- and

four-flash sequence.

5. Release the FEED button after the four-flash sequence.

6. The printer starts calibration process and advances the label ribbon to the next label.

7. Once the calibration process is complete, turn off and on the printer.

2.6 Status light

Colour

Status

Explanation and solution

None

Printer is turned off.

Green

Solid green

Normal functioning

Orange

Solid orange

It lights up for about ten seconds

immediately after the printer is turned on.

If it lasts for more than ten seconds, the

printer requires service.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 21 22

Pas de commentaire

Zebra GK420t Guide de l'utilisateur Page 11