Zebra ZP 450 Manuel d'utilisateur télécharger pdf (Page 39)

Print Operations

Printing in Dispenser Mode

12/8/2010 ZP 450 User Guide P1031442-001

Printing in Dispenser Mode

The dispenser option allows you to print a label with backing (liner/web) removed from the

label, ready for application. When printing multiple labels, removing the dispensed (peeled)

label notifies the printer to print and dispense the next label.

For the dispenser mode to operate correctly, label (taken) sensing must be enabled in your

application software or the Windows® printer driver.

The label (taken) sensor must be enabled along with the normal label settings which include

but are not limited to length, non-continuous (gap), and web (liner).

1. Load your labels into the printer. Close the printer and press the feed button until a

minimum of 4 inches or 100 millimeters of exposed labels exit the printer. Remove the

exposed labels from the liner.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 81 82

Pas de commentaire

Zebra ZP 450 Manuel d'utilisateur Page 39