Zebra LP 2824-Z Manuel d'utilisateur télécharger pdf (Page 13)

Contact ImproMed® with any questions. www.impromed.com E-mail: [email protected] Phone: (800) 925-7171

13Suggested Printer Maintenance and Tips

Feed Button Modes

Power Off Mode (Communications Diagnotics Mode)

With the printer power off, press and hold the Feed button while you turn on the power.

Flash Sequence Action

Rapid Red

Flashing

Firmware Download Mode - The printer starts rapidly flashing red to

denote entry into the Firmware Download mode. Releasing the Feed button

here will start initializing the printer for download. The printer is ready

to start downloading firmware when the status light begins to slowly flash

between red and green.

Amber

Normal Operations Mode - The printer continues into a normal printer

initialization. Releasing the Feed button here will allow the printer to start

normally without firmware download or operating in communications

diagnostics mode.

Green

Communications Diagnostic (Dump) Mode - Release the Feed button

immediately after the printer status light turns green. The printer will

print ‘Now in DUMP’ at the top of the label and then advance to the next

label. After printing the first label, the printer will automatically enter into

diagnostic mode in which the printer prints out a literal representation of

all data subsequently received.

To exit the diagnostics mode and resume printing, turn off and then turn on

the printer. An alternate method for exiting the diagnostic mode is to press

the Feed button as many times as it takes to clear the printer’s command

buffer and print ‘Out of DUMP’ on the label.

1 2 ... 8 9 10 11 12 13 14 15

Pas de commentaire

Zebra LP 2824-Z Manuel d'utilisateur Page 13