Zebra MC9190-G Guide de l'utilisateur télécharger pdf (Page 115)

Accessories 5 - 25

MC9190-G Insertion and Removal

To insert the MC9190-G into the fork lift cradle, place the bottom of the MC9190-G into the bottom of the fork lift

cradle, then press the MC9190-G back into the cradle until the release button locks it in place.

Figure 5-21

Insert MC9190-G into Forklift Cradle

To remove the MC9190-G from the fork lift cradle, lift the release button, then lift the MC9190-G from the cradle.

For one handed removal, use the index finger to press the release button up and then remove the MC9190-G with

your thumb and other fingers.

Figure 5-22

Remove MC9190-G from Forklift Cradle

WARNING! Ensure the bottom of the MC9190-G is fully seated into the cup before you push the MC9190-G into

the fork lift cradle. Failure to do so may cause property damage.

Ensure the MC9190-G is fully inserted into the fork lift cradle and the release button is holding it

securely in place. Pull on the MC9190-G to ensure it is secured properly. Improper insertion can

result in property damage or personal injury.

Do not use the product while driving.

1 2 ... 110 111 112 113 114 115 116 117 118 119 120 ... 173 174

Pas de commentaire

Zebra MC9190-G Guide de l'utilisateur Page 115