Zebra Printers Manuel d'utilisateur télécharger pdf (Page 41)

Using AutoSense The AutoSense feature sets sensitivity of the

transmissive sensor and measures and stores

the form (label) and gap lengths. To activate the

AutoSense feature:

Step 1 Set the power switch to the OFF (0) position.

Step 2 Load labels into the printer (do not use the dis

penser).

Step 3 Press and hold the FEED Control button while

placing the power switch in the ON (1) position.

The STATUS Indicator light will blink. Release

the FEED Control when the printer starts feed-

ing labels and the indicator turns solid green. Do

not hold the FEED Control button more than 5

seconds.

The printer will advance 3-4 labels while per-

forming the adjustment. When the adjustment

is complete, a status summary label will be

printed and the printer will be placed in Diag-

nostic Dump mode.

Dump Mode

Sample Printout

980181-001 Rev.C 33

Operation

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 68 69

Pas de commentaire

Zebra Printers Manuel d'utilisateur Page 41