Zebra QL+ Manuel d'utilisateur télécharger pdf (Page 18)

QL Series User Guide

All models

2. Load the media:

Loading media from an internal supply. Refer to Figure 6.

•Pull the media supports apart, insert the roll of media

between them, and let the media supports close. Ensure

that the media pulls off the core in the direction shown in

Figure 6. The supports will adjust themselves to the

width of the media, and the media should be able to spin

freely on the supports.

Media Roll

Note direction

media pulls off the

roll.

Pull Media Supports

apart.

Figure 6: Installing Media

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 85 86

Pas de commentaire

Zebra QL+ Manuel d'utilisateur Page 18