Zebra TLP 2844-Z Guide de l'utilisateur télécharger pdf (Page 40)

Direct-Thermal LP Model

Before following the steps in this procedure, open the printer by pulling the

release latches forward then lifting the top cover.

Removal

1. Use a #1 Phillips driver to loosen the

four screws that hold the latch frame

to the top case.

2. Grasp the print head spring and pull it

to the left; then, slide it free of the

latch frame.

3. Gently pull the wire bundles from the

print head.

4. Use a #1 Phillips driver to loosen the

two screws and washers and release

the print head from the latch frame

and bracket.

32 980410-001 Rev. B

MOVIE

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 61 62

Pas de commentaire

Zebra TLP 2844-Z Guide de l'utilisateur Page 40