Zebra XiIII Series Manuel d'utilisateur télécharger pdf (Page 66)

58 Zebra XiIII-Series User’s Guide

Press Display Shows Action/Explanation

APPLICATOR PORT

Setting the Applicator Port: Press the RIGHT or LEFT

BLACK OVAL key to display other choices.

Default: Off

Selections: Off, mode 1, mode 2, mode 3, mode 4

Determines the action of the verifier port.

• Off: The applicator port is off.

• Mode 1: Asserts the ~END_PRINT signal low while the

printer is moving the label forward.

• Mode 2: Asserts the ~END_PRINT signal high while the

printer is moving the label forward.

• Mode 3: Asserts the ~END_PRINT signal low for 20

milliseconds when a label has been completed and

positioned. Not asserted during continuous printing modes.

• Mode 4: Asserts the ~END_PRINT signal high for 20

milliseconds when a label has been completed and

positioned. Not asserted during continuous printing modes.

NOTE: Set as suggested by the applicator manufacturer.

WEB S.

These parameters are automatically set during the calibration

procedure. They should only be changed by a qualified service

technician. Refer to the maintenance manual for more

information on these parameters.

Press the NEXT/SAVE key repeatedly to skip these

parameters.

MEDIA S.

RIBBON S.

MARK S.

MARK MED S.

MEDIA LED

RIBBON LED

MARK LED

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 115 116

Pas de commentaire

Zebra XiIII Series Manuel d'utilisateur Page 66