Zebra Z4M Manuel d'utilisateur télécharger pdf (Page 49)

H-974

PAGE 49 OF 57

0808 IH-974

Zebra Z4M Printer User’s Guide 63

ressure a

ustment

Figure 27

Power Rewind Media Alignment

(Power rewind option required.)

NOTE: Under normal operating conditions, media alignment should

not be necessary if the media/backing was initially installed tightly

against the backplate of the take-up spindle.

Perform the following adjustment if the media does not track properly onto the

take-up spindle.

Refer to Figure 28.

1. With media and backing material loaded, open the printhead assembly.

2. Turn the adjustment dial clockwise to align the media/backing material more to

the right. (The image will move to the left.)

Turn the dial counterclockwise to align the media/backing material more to the

left. (The image will move to the right.)

3. Manually rotate the take-up spindle and ensure the media/backing tracks

properly.

4. Close the printhead assembly.

64 Zebra Z4M Printer User’s Guide

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 55 56 57

Pas de commentaire

Zebra Z4M Manuel d'utilisateur Page 49