Zebra Zebra PT403 Guide de l'utilisateur télécharger pdf (Page 15)

PA/PT400 & PA/PT 403 User’s Guide 15

13. Push in the bottom of the media access door to close.

14. Turn on the printer or press the Feed button if the printer is al-

ready on.

NOTES. To ensure optimal print quality, make sure that the

backing material is flush against the peel bar (as shown in

Figure 10). If it starts to “loop “ away from the peel bar, gen-

tly pull down on the backing material

With certain types of media, it may be necessary to reduce

the print speed to 1.5 “ (38. 1mm) per second to produce

consistent peel operation. Consult your authorized Zebra

reseller for advice and information.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 43 44

Pas de commentaire

Zebra Zebra PT403 Guide de l'utilisateur Page 15