Zebra ZXP Series 1 Manuel d'utilisateur télécharger pdf (Page 38)

30 Zebra ZXP Series 7 Card Printer User’s Manual P1036101-002

2: Installation and Setup

Loading the Laminate

Using Partial-Width Laminate (continued)

Step 1. Remove the Lower Laminate Cassette; see Page 19.

Step 2. Open the cassette, and remove the laminate if present.

Step 3. Load the partial-width laminate into the cassette. Note that the collar on the laminate

spool is on the end opposite the geared flange.

Step 4. Trim the partial-width laminate; see Page 22.

Step 5. Rotate the core to adjust the laminate overhang; see Page 23.

Step 6. Install the cassette; see Page 24.

Collar

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 203 204

Pas de commentaire

Zebra ZXP Series 1 Manuel d'utilisateur Page 38