Zebra GK420t Manuel d'utilisateur télécharger pdf (Page 4)

PAGE 4 OF 7 0114 IH-2550

LOADING MEDIA ROLL

1. Open the printer and pull the media guides away

from each other. (See Figure 3)

2. Place the media roll on the roll holders and release

the media guides.

3. Position the media roll so print side faces up as it

passes over the platen roller. (See Figure 3)

4. Pull the end of the media roll so it extends out of the

front of the printer. Ensure the roll turns freely.

(See Figure 4)

NOTE: The media roll should be supported by

the media guides and should not sit in the

bottom of the media compartment.

5. Push the media roll under the media guides.

(See Figure 5)

6. Close the printer. Press down until the cover snaps

closed.

Figure 3

Figure 4

Figure 5

1 2 3 4 5 6 7

Pas de commentaire

Zebra GK420t Manuel d'utilisateur Page 4