Zebra RDU2020 Guide de l'utilisateur télécharger pdf (Page 45)

BASIC

CONFIGURATION

English

set to OFF and the default sensitivity value for

iVOX is set to Medium.

To configure VOX/iVOX sensitivity:

1. Short press the MENU button and navigate until

the following screens are displayed:

If iVOX is enabled the radio will display the

following:

If VOX is enabled (with accessory connected)

the radio will display the following:

2. To change the sensitivity level, use the /

buttons and choose from the following

options:

0 = OFF (For VOX accessories only)

1 = Low sensitivity

2 = Medium sensitivity

3 = High sensitivity

3. Long press the PTT button to save and exit,

--or-- short press the PTT button to configure

the next feature without saving.

NUISANCE CHANNEL DELETE

This feature temporarily removes channels

from the “Scan List” to disregard irrelevant

conversations on a “nuisance” channel that tie

up the radio’s scanning.

To delete a channel from the scan list:

1. Short press the SB2 button to enable “Scan

Mode.” This feature is pre configured by default.

2. Wait until the radio stops on the “nuisance”

channel.

3. Long press the SB2 button. The nuisance

channel is temporarily deleted during the

scanning session.

IVO

VOX

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 77 78

Pas de commentaire

Zebra RDU2020 Guide de l'utilisateur Page 45