Zebra AP 6522 Guide d'installation télécharger pdf (Page 6)

6 AP6522 Access Point

1.4.3 Features

• 2 RJ-45 connectors, one for 10/100/1000 Ethernet and the other for the serial/console connector

• LED indicators

• Slots for wall mounting

• Clips for mounting on a suspended ceiling T-bar (internal antenna model only) with separately orderable

accessories

• Lock port for Kensington® style Security Lock

The AP6522 access point has one RJ-45 connector supporting an 10/100/1000 Ethernet port and accepts

802.3af-compliant power from an external source. The illustration below is of an integrated antenna model.

The AP6522 access point comes with dual radios supporting 802.11a/jointfilesconvert/237922/bgn. The access point contains runtime

firmware which enables the unit to boot after a power up. The runtime firmware on the access point and the

firmware downloaded from the connected controller can be updated via the Ethernet interface.

NOTE When operating in a Gigabit Ethernet environment, CAT-5e or CAT-6 cable

is recommended for Gigabit operation.

NOTE When connecting to an AP6522 model access point, note that the baud

rate is 115,200 as opposed to 19,200.

DC12V GE1/PoE Console

1 2 3 4 5 6 7 8 9 10 11 ... 55 56

Pas de commentaire

Zebra AP 6522 Guide d'installation Page 6