Zebra MC75 Guide de l'utilisateur télécharger pdf (Page 48)

2 - 14 MC75 User Guide

Resetting the MC75

There are two reset functions, warm boot and cold boot. A warm boot restarts the MC75 by closing all running

programs. A cold boot also restarts the MC75, and also resets the clock. Data saved in flash memory or a memory

card is not lost.

If the MC75 is not functioning properly, perform a warm boot first. If the MC75 still does not respond, perform a cold

boot.

Performing a Warm Boot

Hold down the Power button for approximately five seconds. As soon as the MC75 starts to boot release the

Power button.

Performing a Cold Boot

To perform a cold boot simultaneously press the Power button and the 1 and 9 keys.

Waking the MC75

The wake-up conditions define what actions wake up the mobile computer after it has gone into suspend mode.

The mobile computer can go into suspend mode by either pressing the Power button or automatically by Control

Panel time-out settings. These settings are configurable and the factory default settings are shown in Table 2-7 are

subject to change/update.

Table 2-7

Wake-up Default Settings

Condition for Wake-up Power Button Automatic Time-out

AC power is applied. No Yes

Mobile computer is inserted into a cradle. No Yes

Mobile computer is removed from a cradle. No Yes

Mobile computer is connected to a USB device. No Yes

Mobile computer is disconnected from a USB device. No Yes

A key is pressed. No Yes

The scan triggered is pressed. No Yes

The screen is touched. No No

Audio Jack No No

Audio Btn No No

Bluetooth communication Yes Yes

Incoming phone call Yes Yes

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 201 202

Pas de commentaire

Zebra MC75 Guide de l'utilisateur Page 48