Zebra 110Xi4 Guide de l'utilisateur télécharger pdf (Page 47)

Operations

Load Media in Peel-Off Mode

4/30/13 Xi4™/RXi4™ User Guide P1009874-003

To set up the printer in Peel-Off mode, complete these steps:

1. Remove the rewind plate (if installed) from the front of the printer. Store it on the two

mounting screws on the inside of the printer base.

2. Set the printer to Peel-Off mode. See Select Print Mode on page 90 for instructions.

3. Insert media into the printer. See Prepare the Media for Loading on page 37 for

instructions.

Caution • While performing any tasks near an open printhead, remove all rings, watches,

hanging necklaces, identification badges, or other metallic objects that could touch the

printhead. You are not required to turn off the printer power when working near an open

printhead, but Zebra recommends it as a precaution. If you turn off the power, you will lose

all temporary settings, such as label formats, and you must reload them before you resume

printing.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 187 188

Pas de commentaire

Zebra 110Xi4 Guide de l'utilisateur Page 47