Zebra GC420d Guide de l'utilisateur télécharger pdf (Page 69)

Replacing the Printhead

5/23/2012 GC420d™ User Guide P1052685-001

3. Slip the left end of the printhead spring into the left side of the latch bracket; then slide the

right end into the other side. The angle of the “V” fits into the indent on the top of the

printhead bracket.

4. Align the latch bracket up to the top case and ensure that the cable are not bent or pinched.

5. Replace the four screws that hold the latch bracket to the top case and use a #1 Phillips

driver to tighten them.

6. Clean the print head as described under Cleaning the Printhead on page 49.

7. Reload media. Plug in the power cord, turn on the printer and print a status report to

ensure proper function. See Printing a Test (Printer Configuration) Label on page 15

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 99 100

Pas de commentaire

Zebra GC420d Guide de l'utilisateur Page 69