Zebra S400 Guide de l'utilisateur télécharger pdf (Page 68)

Configuration

Print a Network Configuration Label

79695L-001 Rev. A ZM400/ZM600 User Guide 3/27/07

Print a Network Configuration Label

If you are using a print server, you can print a network configuration label after the printer is

connected to the network.

To print a network configuration label, complete these steps:

1. On the control panel, press SETUP/EXIT.

2. Press PLUS (+) or MINUS (-) to scroll through the parameters until you reach

LIST NETWORK.

3. Press SELECT to select the parameter.

4. Press PLUS (+) to confirm printing.

A network configuration label prints (Figure 12). An asterisk designates whether the

wired or wireless print server is active. If no wireless print server is installed, the wireless

portion of the label does not print.

Figure 12 • Network Configuration Label (With a Wireless Print Server Installed)

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 145 146

Pas de commentaire

Zebra S400 Guide de l'utilisateur Page 68