Zebra DA402 Guide de l'utilisateur télécharger pdf (Page 48)

Label/Tag Specifications

Label/Tag Width

1” to 4.25” (25.4 mm to 108 mm)

1” to 2.25” (25.4 mm to 57 mm) for tag stock

Label/Tag Length 0.5” to 22” (13 mm to 559 mm) with standard memory

Interlabel Gap

0.08” to 0.16” (2 mm to 4 mm)

0.118” (3 mm) recommended

Label/Tag Thickness

.003” to .007” (.08 mm to .18 mm)

.003” to .0053” (.08 mm to .135 mm) for cutter option

Label

Roll

Size

Max. Outer

Diameter

5” (127 mm)

Inner Core

1” (25.4 mm) or 1.5” (38 mm)

Media

Requirements

Use Zebra-brand direct thermal media that is outside

wound. Media may be reflective (black mark) sensing

or transmissive sensing, die-cut, notched, or

continuous.

ü For die-cut labels, use only full auto dies.

ü Notched media must have a 0.5” (13 mm) wide x

0.094” (2.4 mm) long cutout located in the center of the

roll. The reflective media black marks must be located

in the center of the roll.

Minimum Black Mark Dimensions:

Mark width: 0.5” (13 mm) centered and perpendicular

to the edge of the media.

Mark length: 0.094” (2.4 mm) parallel to the bottom

edge of the media.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 54 55 56

Pas de commentaire

Zebra DA402 Guide de l'utilisateur Page 48