Zebra Stripe Guide de l'utilisateur télécharger pdf (Page 15)

Loading the Media

Media widths and thicknesses vary between applications. To maintain print

quality from one application to another, refer to “Print Quality

Adjustments” in Routine Care and Adjustments.

NOTE: Zebra recommends using media that is outside wound (you can see

the labels on the outside of the roll).

Tear-Off Mode

1. Refer to Figure 7. Move the head open lever (a) counterclockwise to the

open position to raise the printhead (b).

2. Slide the media guide (c) and the media supply guide (d) as far out from

the printer frame as possible.

If you are loading roll media in Tear-Off mode, follow steps 3-5. For

loading fanfold media in Tear-Off mode, skip to step 6.

3. Place the media roll on the media supply hanger (e), and thread the me-

dia through the printhead assembly as shown.

S400 & S600 User’s Guide 7

Figure 7

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 77 78

Pas de commentaire

Zebra Stripe Guide de l'utilisateur Page 15