Zebra Stripe Guide de l'utilisateur télécharger pdf (Page 70)

Storage and Reshipping

If you are not placing the printer into operation immediately, repackage it

using the original packing materials. The printer may be stored under the

following conditions:

Temperature: -40° to 140° F (-40 to 60° C)

Relative humidity: 5% to 85% non-condensing

To ship the printer, carefully pack it in a suitable container to avoid damage

during transit. Whenever possible, use the original container from the

factory. A shipping container can be purchased from Zebra Technologies

Corporation, if the original one has been lost or destroyed.

If you use a different container, package the printer carefully to avoid

damage.

CAUTION: When packaging the printer in a rigid container, use shock

mounts or shock-absorbing packing material. A rigid container will allow

shock on the outside to be transmitted undamped to the printer which may

cause damage. Also, before packing, remove all ribbon and media from the

supply and take-up spindles to prevent damage to the printer.

62 S400 & S600 User’s Guide

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 76 77 78

Pas de commentaire

Zebra Stripe Guide de l'utilisateur Page 70