Zebra Z4M Manuel d'utilisateur télécharger pdf (Page 80)

A label format was sent to the printer. Several labels print, then the

printer skips, misplaces, misses, or distorts the image on the label.

A label format was sent to the printer but not recognized. The DATA

light flashes but no printing occurs.

72 Zebra Z4M Printer User’s Guide

Problem Solution

The host is set to EPP parallel

communications.

Change the settings on the computer host to standard

parallel communications.

The serial communication settings are

incorrect.

Check the communication cable length. See page 18

for requirements.

Check the printer driver or software communications

settings (if applicable).

Problem Solution

The prefix and delimeter characters set in

the printer do not match the ones in the

label format.

Verify the prefix and delimeter characters. See

page 49.

Incorrect data is being sent to the printer.

Check the communication settings on the computer.

Ensure that they match the printer settings.

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 101 102

Pas de commentaire

Zebra Z4M Manuel d'utilisateur Page 80