Zebra 105SL Plus Guide de l'utilisateur télécharger pdf (Page 100)

76 105SL User Guide 6/4/2004 11342L Rev. 8

Routine Maintenance

Lubrication

Fuse Replacement

The printer uses a metric-style fuse (5 × 20 mm IEC) rated at F5A, 250V. The end caps of the

fuse must bear the certification mark of a known international safety organization (see

Figure 6 on page 12).

Depending on the model you have, the fuse may not be user-replaceable (see Figure 44) and

may need to be replaced by a qualified service technician. Refer to the Maintenance Manual

(part number 32056L) for details.

Figure 44 • Fuse Replacement

Caution • No lubricating agents other than Zebra-supplied, silicon-only lubricants should

be used on the spindle felt clutches of this printer. Other commercially available lubricants

damage the finish and mechanical parts.

Note • Models with a user-replaceable fuse have a warning label next to the fuse for easy

identification.

1 2 ... 95 96 97 98 99 100 101 102 103 104 105 ... 129 130

Pas de commentaire

Zebra 105SL Plus Guide de l'utilisateur Page 100