Zebra 105SL Plus Guide de l'utilisateur télécharger pdf (Page 113)

Troubleshooting

Printer Diagnostics

11342L Rev. 8 6/4/2004 105SL User Guide 89

FEED and PAUSE Self Test

Performing this self test temporarily resets the printer configuration to the factory default

values. These values are active only until power is turned off unless you save them

permanently in memory.

To perform a FEED and PAUSE self test, complete these steps:

1. Turn Off (O) the printer.

2. Press and hold FEED and PAUSE while turning the power On (I). Hold FEED and

PAUSE until the DATA light turns off.

No labels print at the end of this test.

This test is controlled from the front panel display (see COMMUNICATIONS on page 52).

Figure 49 shows a typical printout from this test. Turn off the power to exit this self test and

return to normal operation.

Figure 49 • Communications Diagnostics Test Label

Additional Printer Diagnostics

Additional diagnostic tests are available for this printer. See the Maintenance Manual for

information about these additional tests.

Note • The communications test label prints upside-down.

1 2 ... 108 109 110 111 112 113 114 115 116 117 118 ... 129 130

Pas de commentaire

Zebra 105SL Plus Guide de l'utilisateur Page 113