Zebra 2742 Manuel d'utilisateur télécharger pdf (Page 1)

Zebra Autosense Procedure

Autosense Procedure, Configuration Label and Dump Mode:

Models: Orion (2442, 2443 and 2543), Transport (P-2242), Xport (P-2222),

LP/TLP Strata (2684), LP/TLP-2722, 2742, 3742, LP/TLP-2824, LP/TLP 2844

and TLP-3842

1. Turn off printer and have media loaded (on older Transports, with no

ON/OFF switch, remove battery).

2. Hold feed button down, and turn printer back on (on older Transports, re-

insert battery) while holding down the feed button.

3. When the light starts flashing, release the feed button.

4. Printer light will turn green and advance a few blanks.

5. After printer stops advancing and prints the internal information

(https://support.zebra.com/cpws/docs/eltron/epl_config.htm), press the feed

button one time.

6. You will get another label with the "Out of Dump" message on it.

Printer is now ready for use.

Zebra Autosense Procedure Autosense Procedure, Configuration Label and Dump Mode: Models: Orion (2442, 2443 and 2543), Transport (P-2242), Xport (P-2

Plus de documents pour Imprimer et scanner Zebra 2742

Pas de commentaire