Zebra 2844 Printer Guide de l'utilisateur télécharger pdf (Page 31)

Using the Cutter Option

Printers that have a bezel with a motorized blade can dispense one or more

forms that are then automatically cut from the media supply. This option

cuts through continuous paper from rolls and liner between labels. Keep

the cutter dry. Never use any solutions or solvents to clean the blade.

Use the

command to set the cut position and the

command to cut

immediately outside a form.

If the blade cuts through labels, adhesive

can jam the cutter.

1. Turn OFF (O) printer power and

unplug the power and interface cables

before clearing the cutter.

2. After removing debris, plug in the

power and interface cables, turn on

the printer, then test for normal

operation.

980483-001A 23

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 53 54

Pas de commentaire

Zebra 2844 Printer Guide de l'utilisateur Page 31