Zebra Eltron Card Printer Manuel d'utilisateur télécharger pdf (Page 42)

980261-001 Rev. B

MEDIA LOADING ORIENTATION

Orient the cards with the Smart Card Chip at the

top of the card and facing away from the printer.

SMART CARD CONTACT STATION INTERFACE

When a command to the parallel printer inter-

face sends a card to the Smart Card Contact Sta-

tion, the printer connects the Smart Card Contact

Station to the female DB-9 connector on the rear

of the printer.

An attached external Smart Card Programmer

can be used to program Smart Card chips.

DO NOT position printing over the Smart Card

Chip.

Refer to the Card Printer Programmer's Manual for complete programming information.

DB - 9

PINS

C7 (I/O)

C8 (RFU)

SMART CARD

CONTACT POINTS

C6 (Vpp)

(GND when chip is at

station)

C2 (Reset)

C3 (Clock)

SMART CARD

CONTACT POINTS

CI (Vcc)

C4 (RFU)

C5 (GND)

DB - 9

PINS

1 2 ... 37 38 39 40 41 42 43 44 45 46

Pas de commentaire

Zebra Eltron Card Printer Manuel d'utilisateur Page 42