Zebra P120i Guide de l'utilisateur télécharger pdf (Page 53)

P120i Printer Setup

Printing a Test Card

980504-001 Rev. A P120i Card Printer User Guide 43

Card Output Hopper

1. Raise the printer lid and pull the output hopper down to place it in its functional position.

2. When not using the printer, place the card output hopper back in its closed position to protect the

printer from dust.

Printing a Test Card

With ribbon cartridge and cards loaded, your P120i printer is ready to print. To check the

operation of the printer, you should print a test card.

1. Place the printer power switch in the OFF (0) position.

2. While holding down the Multi Function Button, place the printer power switch in the ON ( | ) posi-

tion. The LCD status window will glow blue.

3. Keep pressing the Multi Function button until the PRINT TEST CARD message appears in the

window.

4. Release the Multi Function button and a test card will print after a few seconds.

980504-03-04

CARD

OUTPUT

HOPPER

980504-03-06

P520CEM

Serial N¡ 060376

Firmware: V1.50

Head resistance: 1568

Offset: X002 - Y015

EC: 0014

Printing Counter: 00002716

MULTI-FUNCTION

SWITCH

POWER

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 77 78

Pas de commentaire

Zebra P120i Guide de l'utilisateur Page 53