Zebra Wireless Print Server Guide de l'utilisateur Page 33

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 94
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 32
25
Wireless Status and Settings
View or Change Control Panel Parameters for the Wireless Print Server
9/29/05 Wireless Print Server User Guide 13422L-002 Rev. B
CHANGE SUBNET
View or Change the Subnet
This parameter can be modified only when
PERMANENT is selected for
OBTAIN IP ADDRESS.
Selections: 0 to 255 for each field
Default Value: 0.0.0.0
Note • Leading zeroes are not shown in the address. If an IP
address contains more digits than can be displayed at one time, use
the left or right arrows to scroll through the digits.
To modify this parameter:
To increase the value, press the up arrow.
To decrease the value, press the down arrow.
CHANGE GATEWAY
View or Change the Gateway
This parameter can be modified only when PERMANENT is selected for
OBTAIN IP ADDRESS.
Selections: 0 to 255 for each field
Default Value: 0.0.0.0
Note • Leading zeroes are not shown in the address. If an IP
address contains more digits than can be displayed at one time, use
the left or right arrows to scroll through the digits.
To modify this parameter:
To increase the value, press the up arrow.
To decrease the value, press the down arrow.
CHANGE IP PROTOCOL
Change the IP Protocol
Determines the method(s) by which the print server (wired or wireless)
receives the IP address from the server.
This parameter can be modified only when
AUTO SELECT is selected
for
OBTAIN IP ADDRESS.
Selections: ALL, GLEANING ONLY, RARP, BOOTP, DHCP,
DHCP AND BOOT
Default Value: ALL
To modify this parameter:
Press the up or down arrow to scroll through the selections.
Table 4 • Control Panel Parameters for
the ZebraNet Wireless Print Server (S4M only) (Continued)
Parameter Explanation
Vue de la page 32
1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 93 94

Commentaires sur ces manuels

Pas de commentaire