Zebra Wireless Print Server Guide de l'utilisateur télécharger pdf (Page 61)

Troubleshooting

Encryption Issues

9/29/05 Wireless Print Server User Guide 13422L-002 Rev. B

Encryption Issues

My wireless connection

is inconsistent. The

signal strengths change

back and forth between

high and low numbers.

An access point may be bad. The

card appears to be switching

affiliations between access points.

Check the access points on your WLAN,

particularly the one closest to the printer.

The wireless card is repeatedly

associating with two or more

access points because of varying

signal strengths.

Check the access points on your WLAN to

determine what is causing the signal

strengths to vary.

Table 6 • General Issues and Recommended Solutions (Continued)

Issue Possible Cause Recommended Solution

Table 7 • Encryption Issues and Recommended Solutions

Issue Possible Cause Recommended Solution

The entry field for

WEP keys on the

printer’s web page

does not display all 26

characters.

The field accepts 26 characters, but

they may not be able to display all

at once because of your browser or

system settings.

Use the left and right arrow keys on your

keyboard to move the cursor in the WEP

key field and reveal characters that may not

display.

I set encryption keys

using the

^WE ZPL

command, and now my

wireless system does

not function.

The ZPL string that you sent to the

printer may not have been correct.

The printer may be using the

wrong encryption key or looking

for one that is undefined.

Resend the

^WE command (see ^WE

on page 41). Make sure that all of the

required commas are in place in the

command. A missing or extra comma in

this command can disable the wireless

system.

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 93 94

Commentaires sur ces manuels

Pas de commentaire

Zebra Wireless Print Server Guide de l'utilisateur Page 61

Commentaires sur ces manuels

Produits connexes et manuels pour Serveurs d'impression Zebra Wireless Print Server