Zebra Z4Mplus Manuel d'utilisateur télécharger pdf (Page 166)

136 Z4Mplus and Z6Mplus User Guide

Memory Cards

PCMCIA Card

See the instructions below to install the Type I or Type II

compliant PCMCIA card:

Install the PCMCIA Card

Refer to illustration on next page.

1. Remove the PCMCIA card shield from the rear of the printer.

2. Insert the PCMCIA card, with the notch UP, into the card slot as shown. Insert far

enough to cause the eject button to pop out.

3. Reinstall the PCMCIA card shield over the PCMCIA card and card slot.

The printer is now ready to operate with the additional memory or font option.

Caution • The printer electronics are susceptible to static discharge. Use a properly

grounded wrist strap while working on the printer.

Note • The PCMCIA card is hot-swappable, it can be installed while the printer is

On (l).

1 2 ... 161 162 163 164 165 166 167 168 169 170 171 ... 177 178

Pas de commentaire

Zebra Z4Mplus Manuel d'utilisateur Page 166