Zebra ZXP Series 1 Manuel d'utilisateur télécharger pdf (Page 103)

Smart Card Options

P1032297-001 Rev. A Zebra ZXP Series 3 Card Printer User’s Manual 99

Contact Station

Smart Card Interface

When a command to the printer interface sends a card to the Smart Card Contact Station, the

printer connects the Smart Card Contact Station to the female DB-9 connector on the rear of

the printer.

DB-9 Connector (detail)

An attached external Smart Card Programmer can be used to program Smart Card chips. The

following table shows the Smart Card Contact Points.

DB-9 Connector location for

Smart Card Contact Station

Pin Smart Card Contact Points DB-9 Smart Card Contact Points

1 C1 (VCC) 6 C6 (Vpp)

2 C2 (Reset) 7 C7 (I/O)

3 C3 (Clock) 8 C8 (RFU)

4C4 (RFU)

(GND when chip

is at station)

5 C5 (GND)

1 2 ... 98 99 100 101 102 103 104 105 106 107 108 ... 115 116

Pas de commentaire

Zebra ZXP Series 1 Manuel d'utilisateur Page 103