Zebra TTP7030 Spécifications Page 21

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 144
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 20
21
Installation
Making A Test Printout
02/11/2009 TTP 7020™/TTP 7030™ Technical Manual P1003636-001
Making A Test Printout
1. Is a power button available for the printer?
If… Then…
Yes a. Remove power from the printer.
b. Hold the feed-forward button depressed while powering ON the printer.
c. Keep the button depressed until printing starts.
This produces a printout showing the firmware program version and date,
control board revision number and serial number, name of loaded fonts and
logotypes, and the parameter settings.
d. Each successive press of the button will produce a test printout.
e. Switch the printer OFF and ON again to exit self-test mode.
No
a. Lift the printhead.
b. Press and hold the FF-button while lowering the printhead, and keep it
pressed until after the auto-load is completed.
c. Release the button.
A self-test printout will be printed.
Note • this feature was introduced in firmware version 2.44b.
Vue de la page 20
1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 143 144

Commentaires sur ces manuels

Pas de commentaire