Zebra RZ Series Guide de l'utilisateur télécharger pdf (Page 65)

Operations

Adjust Printhead Pressure

1/11/11 Z Series

/RZ™ Series User Guide 79695L-003

2. If necessary, adjust the pressure adjustment dials as follows:

Table 10 • ZM600 and RZ600 Printhead Pressure

Media Width

Inside Dial Outside Dial

2 in. (50 mm) 6 1

3 in. (75 mm) 6 2

4 in. (100 mm) 7 3

5 in. (125 mm) 7 4

5.5 in. and up (140 mm and up) 6 6

If the media... Then...

Requires higher pressure to

print well

Increase both dials one position.

Shifts left while printing Increase the outside dial setting one position, or

decrease the inside dial setting one position.

Shifts right while printing Increase the inside dial setting one position, or

decrease the outside dial setting one position.

Prints too lightly on the left side

of the label.

Increase the inside dial setting one position.

Prints too lightly on the right

side of the label.

Increase the outside dial setting one position.

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 153 154

Pas de commentaire

Zebra RZ Series Guide de l'utilisateur Page 65