Zebra II Spécifications Page 202

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 262
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 201
^LS
Label Shift
Description: The ^LS command allows for compatibility with Z-130 printer formats
that are set for less than full label width. It is used to shift all field positions to the
left so that the same commands used on a Z-130 or Z-220 Printer can be used on
other Zebra printers.
To determine the value for the ^LS command use the following formula.
Z-130 and Z-220 values for ^LHx + ^FOx
(distance from edge of label) = printer value for ^LSa.
If the print position is less than 0, set ^LS to 0.
To be compatible with existing Zebra printers, this command must come before the
first ^FS command. Once you have issued an ^LS command, the setting is retained
until you turn off the printer or send a new ^LS command to the printer.
Format: ^LSa
Parameters:
a = shift left value (in dots)
Accepted Values: -9999 to 9999
Initial Value at Power-up: 0
Comments: When entering positive values, it is not necessary to use the + sign. The
value is assumed to be positive unless preceded by a negative sign.
ZPL II Programming Guide Volume One: Command Reference for X.10
194
Vue de la page 201
1 2 ... 197 198 199 200 201 202 203 204 205 206 207 ... 261 262

Commentaires sur ces manuels

Pas de commentaire