Zebra EPL2 Manuel d'utilisateur Page 39

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 82
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 38
G Command - Draw Graphics
Description Use this command to draw single line of a bit
mapped graphic. The bit map data pattern can
be repeated automatically, in sequence, up to
eight times. The line height is set by the H com
-
mand. The bit map image is assembled on a line
by line basis.
Syntax
¬Gp
1
DATA
Parameters p
1
= Number of bytes to follow.
Values : 01 to 99
DATA = Data bytes representing the bit
mapped graphic. Each bit represents
one dot (1=black, 0=white).
Each additional line of graphics must start with
the G command and include the complete com-
mand parameter and data string
(¬Gp
1
DATA).
DO NOT add carriage returns (CR) or Line Feeds
(LF)orCR/LF to the end of a Draw Graphics com-
mand line.
Sending a CR or LF or CR/LF will advance the print
position by full text line as defined by the default or
previously issued A command.
980353-001 Rev.B 3-17
Vue de la page 38
1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 81 82

Commentaires sur ces manuels

Pas de commentaire