Zebra R402 Guide de l'utilisateur télécharger pdf (Page 19)

Using the Optional Media Adapter Plates

If your media roll has a larger diameter

core, you can use an accessory (part

number 105810-002) to adapt the core to

the media holders.

1. Note which position will fit the

diameter of the roll core.

2. On the left side plate, align the pegs

with the screws and use a small

Phillips driver to tighten them.

3. On the right side plate, align the pegs

with the screws and use a small

Phillips driver to tighten them.

4. Align the plates so that the pegs hold

the roll core and press together.

5. Place the roll into the media

compartment.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 71 72

Commentaires sur ces manuels

Pas de commentaire