Zebra R402 Guide de l'utilisateur télécharger pdf (Page 38)

^RT – Read Tag

The format for the ^RT instruction is:

^RT#,b,n,f,r,m,s

where

^RT = Read Tag command

# = Number to be assigned to the Field

Default value: 0

Other Values: 1 to 9999

b = Starting Block Number

Default value: 0

Other values: 1 to n, where n is the maximum number of

blocks for the tag

n = Number of blocks to read

Default value: 1

Other values: 2 to n, where n is maximum number of blocks

minus starting block number. In other words, if the tag has 8

blocks (starting with block 0) and you’re starting with block 6,

n can be 2. This would give you block 6 and block 7

information.

f = Format

Default value: 0 ASCII

Other values: 1 Hexadecimal

r = Retries

Default value: 0

Other values: 1 to 10, number of retries

m = motion

Default value: 0 (Feed label after writing)

Other value: 1 (No Feed after writing, other ZPL may cause

a feed)

s = Special Mode

Default value: 0

Other values: 1 to 255, to specify more detailed mode control.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 71 72

Pas de commentaire

Zebra R402 Guide de l'utilisateur Page 38