Zebra TLP 3844-Z Guide de l'utilisateur télécharger pdf (Page 54)

Media Specifications

Width 1 to 4.25 inches / 25.4 to 108 millimeters)

Length 0.5 to 39 inches / 13 to 559 millimeters with standard memory

Gap 0.08 to 0.16 inch (2.0 to 4.0 millimeters)

0.118 inch / 3.0 millimeters recommended

Thickness 0.003 to 0.007 inch / 0.08 to 0.18 millimeter

Roll Size Maximum outer diameter: 5 inches (127 millimeters)

Inner Core diameters: 1 or 1.5 inches (25.4 or 38 millimeters)

Optional media hangers available for larger inner core

diameters

Requirements

✔

User Zebra-brand direct thermal or thermal transfer media

that is outside wound. Media may be reflective (black mark)

sensing or transmissive sensing, die-cut, notched, or

continuous)

✔

For die-cut labels, use only full auto dies.

✔

Notched media must have a 0.5 inch (13 mm) wide by 0.094

inch (2.5 mm) long cutout located in the center of the roll.

✔

The reflective media black marks must be located in the

center of the roll. Mark width 0.5 inch (13 mm) centered and

perpendicular to the edge of the media; mark length 0.094

inch (2.4 mm) parallel to the bottom edge of the media.

Always thoroughly test your desired media for your specific application

before buying in large quantities.

Ribbon Specifications for TLP model

Roll Size Maximum outer diameter: 1.3 inches / 33 millimeters

Length 2,900 inches / 74 meter capacity; provides 1:1 media roll to

ribbon ratios

Width At least as wide as media

Setup Ink-side out

Requirements User Zebra-brand ribbon that is outside wound.

46 980441-001 Rev. A

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 67 68

Pas de commentaire

Zebra TLP 3844-Z Guide de l'utilisateur Page 54