Zebra DA402 Guide de l'utilisateur télécharger pdf (Page 32)

5. The media is out.

Loadarollofmedia,followingtheinstructionsin“Loadingthe

Media”onpage5.Then,pressthefeedbuttontoresumeprinting.

The printhead is open.

Close the top cover. Then, press the feed button to resume printing.

The cutter is jammed.

Turn off the printer and remove any jammed labels from the cutter

unit. Then, turn on the printer to resume printing.

6. The printer is paused.

Press the feed button to resume printing.

7. The printhead is under temperature.

Continue printing while the printhead reaches the correct operating

temperature.

The printhead is over temperature.

Printing will stop until the printhead cools to an acceptable printing

temperature. When it does, the printer will automatically resume

operation.

8. FLASH memory is not programmed.

Return the printer to an authorized reseller.

Print Quality Problems

No print on the label.

Make sure the correct media (direct thermal) is loaded. Try this:

Quickly rub your nail or a blunt object over the label surface. If it does

not produce dark marks, the wrong media (thermal transfer) is loaded.

Isthemedialoadedcorrectly?Followtheinstructionsin“Loadingthe

Media”onpage5.

The printed image does not look right.

Theprintheadisdirty.Cleantheprintheadaccordingtotheinstructions

on page 33.

The printhead is under temperature.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 55 56

Pas de commentaire

Zebra DA402 Guide de l'utilisateur Page 32