Zebra LI 72 Guide de l'utilisateur télécharger pdf (Page 63)

QL Plus Series User Guide

To terminate the Communications Diagnostics Mode and re-

turn the printer to normal operations:

1. Turn the printer OFF.

2. Wait 5 seconds.

3. Turn the printer ON.

Contacting Technical Support

If the printer fails to print the conﬁguration label, or you en-

counter problems not covered in the Troubleshooting Guide,

contact Zebra Technical Support. Technical Support ad-

dresses and phone numbers for your area can be found in

AppendixDofthismanual.Youwillneedtosupplythefol-

lowing information:

• Modelnumberandtype(e.g.QL420Plus)

• Unitserialnumber(Foundonthelargelabelontheback

of the printer, also found in the conﬁguration label print-

out. Refer to Figure 26)

• ProductCongurationCode(PCC)(15digitnumberfound

on the label on the back of the unit)

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 85 86

Pas de commentaire

Zebra LI 72 Guide de l'utilisateur Page 63