Zebra ZD500 Guide de l'utilisateur télécharger pdf (Page 127)

115

Maintenance

Cleaning

1/16/2014 ZD500 Series™ Thermal Transfer Printer User’s Guide P1062653-002 Rev. A

3. Lift the platen out of the printer’s bottom frame.

4. Clean the platen with the alcohol moistened swab. Clean from the center out. Repeat this

process until the all of the roller surface has been cleaned. If there has been heavy

adhesive build-up or label jam, repeat with a new swab to remove residual contaminates.

Adhesives and oils, for example, may be thinned by the initial cleaning but not completely

removed.

5. Install the platen in the printer. Discard the cleaning swabs after use - do not reuse.

6. Make sure the bearings and drive gear are on the shaft of the platen.

1 2 ... 122 123 124 125 126 127 128 129 130 131 132 ... 159 160

Pas de commentaire

Zebra ZD500 Guide de l'utilisateur Page 127