Zebra ZD500 Guide de l'utilisateur télécharger pdf (Page 45)

Setup

ZebraNet® Internal Wireless Print Server Option

1/16/2014 ZD500 Series™ Thermal Transfer Printer User’s Guide P1062653-002 Rev. A

ZebraNet

Internal Wireless Print Server Option

This section covers basic configuration of your ZebraNet Internal Wireless Print Server option

for operation. For more detailed information, refer to the ZebraNet Wired and Wireless Print

Servers User Guide.

You may configure your printer for wireless operation in the following ways. This basic guide

covers only the first option, the Connectivity Wizard.

• Through the Connectivity Wizard, which writes a ZPL script for you. On the last screen

of the utility, you may choose to send the command directly to your printer, or you may

choose to save the ZPL script to a file. The saved ZPL file has several purposes:

• The file can be sent to the printer through any available connection (serial, parallel,

USB, or wired print server).

• The file can be resent to the printer after the network settings have been restored to

factory defaults.

• The file can be sent to multiple printers that will use the same network settings.

• Through ZPL script that you write yourself. Use the ^WX command to set the basic

parameters for security type. You can send the command through any available connection

(serial, parallel, USB, or wired print server). Refer to the ZPL Programming Guide for

more information on this option.

• Through Set/Get/Do (SGD) commands that you send to the printer. Begin with

wlan.security to set the wireless security type. Depending on which security type

that you select, other SGD commands will be necessary to specify other parameters. You

can send the commands through any available connection (serial, parallel, USB, or wired

print server). Refer to the ZPL Programming Guide for more information on this option.

Important • A wireless option board must be installed on your printer before you can

configure the printer to communicate using the wireless radio option.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 159 160

Pas de commentaire

Zebra ZD500 Guide de l'utilisateur Page 45