Zebra Wireless Print Server Guide de l'utilisateur télécharger pdf (Page 100)

ZPL Commands for Wireless Operation

^NP

100

14143L-005 Rev. A Wireless User Guide 4/29/08

^NP

Set Primary/Secondary Device

Description Use this command to specify whether to use the printer’s or the print server’s

LAN/WLAN settings at boot time. The default is to use the printer’s settings.

When the printer is set as the primary device, you can set it up using ZPL commands or the

Wireless Setup Wizard utility, and any wired print server inserted into the printer will use those

settings. The drawbacks to using the printer as primary are:

• Any wired print server inserted into the printer will lose its original settings if the printer is

set to check for the wired print server (see

^NB on page 95)

• GLEANING ONLY for IP PROTOCOL will no longer work.

Format ^NPa

The following table identifies the parameters for this format.

Parameters Details

a = device to use as

primary

Accepted Values:

P = PRINTER

M = MPS/PRINTSERVER

Default Value: P

1 2 ... 95 96 97 98 99 100 101 102 103 104 105 ... 227 228

Pas de commentaire

Zebra Wireless Print Server Guide de l'utilisateur Page 100