Zebra Wireless Print Server Guide de l'utilisateur télécharger pdf (Page 110)

ZPL Commands for Wireless Operation

^WP

110

14143L-005 Rev. A Wireless User Guide 4/29/08

^WP

Set Wireless Password

Description Use this command to set the four-digit wireless password (not the same as the

general printer password). If the wireless password is 0000, the Wireless and Wireless Plus

print servers run in an “unprotected” mode, which means that you do not need to enter the

wireless password through the control panel to view or modify wireless settings.

If a wireless password is set, the values for the following parameters will not appear through

the control panel until the wireless password is entered:

• MAC Address

• ESSID

•WLAN Security

•WEP Type

•WEP Index

•Reset Network

Format ^WPa,b

The following table identifies the parameters for this format.

Note • This command does not apply to the S4M.

Parameters Details

a = old wireless

password

Accepted Values: 0000 through 9999

Default Value: 0000

b = new wireless

password

Accepted Values: 0000 through 9999

Default Value: 0000

1 2 ... 105 106 107 108 109 110 111 112 113 114 115 ... 227 228

Pas de commentaire

Zebra Wireless Print Server Guide de l'utilisateur Page 110