Zebra Wireless Print Server Guide de l'utilisateur Page 106
- Page / 228
- Table des matières
- DEPANNAGE
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
ZPL Commands for Wireless Operation
^WI
106
14143L-005 Rev. A Wireless User Guide 4/29/08
^WI
Change Wireless Network Settings
Description Use this command to change the wireless network settings. On Zebra
ZM400/ZM600™ and S4M™ printers running V53.15.xZ or later or on RZ400/RZ600™
printers running R53.16.x or later, Zebra recommends using ^ND on page 97 for these settings.
Format ^WIa,b,c,d,e,f,g,h,i
The following table identifies the parameters for this format.
Parameters Details
a = IP resolution Accepted Values:
A =All
B =BOOTP
C = DHCP and BOOTP
D = DHCP
G = Gleaning only (Not recommended when the
Wireless Print Server or Wireless Plus Print Server
is installed.)
R =RARP
P = Permanent
Default Value: A
b = IP address Accepted Values: Any properly formatted IP address in the
xxx.xxx.xxx.xxx format.
Default Value: 000.000.000.000
c = subnet mask Accepted Values: Any properly formatted subnet mask in the
xxx.xxx.xxx.xxx format.
Default Value: 000.000.000.000
d = default gateway Accepted Values: Any properly formatted gateway in the
xxx.xxx.xxx.xxx format.
Default Value: 000.000.000.000
e = WINS server address Accepted Values: Any properly formatted WINS server in the
xxx.xxx.xxx.xxx format.
Default Value: 000.000.000.000
f = connection timeout
checking
Accepted Values:
Y = yes
N = no
Default Value: Y
g = timeout value
Time, in seconds, before the connection times out.
Accepted Values: 0 through 9999
Default Value: 300
- ZebraNet 1
- Wireless User Guide 1
- Contents 3
- Section Description 10
- Contacts 11
- Document Conventions 12
- About This Document 13
- Introduction 15
- Hardware 16
- Firmware 16
- Access Point 19
- Technologies 20
- Systems 21
- Supported Security Types 22
- Security Type Supported? 23
- Wireless Plus Print Server 25
- = Active Print Server 25
- Wireless Print Server 25
- Configuration 29
- Any Other Wireless Printer 32
- 7. Click Next 33
- PSK Type to String 34
- PSK Name field 34
- Click OK 35
- To... Then 36
- Save Script to a file 37
- Wireless Radio Card 38
- 5. Turn on (I) the printer 39
- 6. Turn on (I) the printer 41
- Wireless Status 43
- Plus (+) for 105SL 44
- Status Indicator Meaning 44
- SIGNAL STRENGTH and 45
- SIGNAL QUALITY 45
- Network Configuration Label 46
- PAUSE/FEED 47
- Function 48
- WIRED PS CHECK? 48
- ^NP ZPL command 49
- PRIMARY NETWORK 50
- LOAD FROM EXT? 50
- ACTIVE PRINTSRVR 50
- IP PROTOCOL 50
- Parameter 51
- RESET NETWORK 52
- Parameter Explanation 53
- Wireless Status and Settings 55
- Troubleshooting 57
- Wireless Error Messages 58
- General Issues 58
- DEFAULT NET 59
- IP Issues 61
- WebView Web Pages 63
- IP ADDRESS 64
- Home Page 65
- View Printer Configuration 66
- 3. Click Submit Changes 67
- 4. Click on the statement 67
- Network Configuration Menu 69
- Print Listings on Label 69
- Media Setup Calibration 70
- ZPL Control Advanced Setup 71
- Network Configuration Screens 72
- SMTP TCP/IP 74
- X60.15.x and ZSPx 74
- Directory Listing 77
- Click Edit 79
- Button Function/Operation 80
- Alert Setup 81
- Printer Controls 84
- Button Function 85
- Print Server Settings 86
- Print Server: 88
- TCP/IP Configuration 88
- TCP/IP Logical Printing Ports 88
- Cancel Job 90
- View Configuration Sheet 91
- View Port Status Contact 91
- ZPL Commands 93
- Parameters Details 100
- Format ~WL 109
- Region Channel Mask 114
- Configure Wireless Securities 115
- Security Type 03: WEP 128-Bit 119
- Security Type 02: WEP 40-Bit 119
- Security Type 04: EAP-TLS 120
- Security Type 05: EAP-TTLS 120
- Security Type 06: EAP-FAST 120
- Security Type 07: PEAP 121
- Security Type 08: LEAP 121
- Security Type 09: WPA PSK 121
- Security Type 10: WPA EAP-TLS 122
- Security Type 13: WPA PEAP 123
- Security Type 14: WPA LEAP 123
- Security Type 15: Kerberos 123
- SGD Wireless Commands 125
- Overview 126
- Do commands: 127
- Command Structure 128
- Commands Details 129
- Security Type 2: WEP 40-Bit 194
- Security Type 3: WEP 128-Bit 195
- Security Type 4: EAP-TLS 195
- Security Type 5: EAP-TTLS 196
- Security Type 6: EAP-FAST 196
- Security Type 7: PEAP 197
- Security Type 8: LEAP 197
- Security Type 9: WPA PSK 197
- Glossary 217
- © 2008 ZIH Corp 228
Produits connexes et manuels pour Serveurs d'impression Zebra Wireless Print Server
Serveurs d'impression Zebra II Spécifications
(262 pages)
(262 pages)
Serveurs d'impression Zebra II Spécifications
(412 pages)
(412 pages)
© 2020, manymanuals.fr. Tous droits réservés | 0.062 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels