Zebra Wireless Print Server Guide de l'utilisateur télécharger pdf (Page 197)

197

SGD Commands for Wireless Operation

wlan.security

4/29/08 Wireless User Guide 14143L-005 Rev. A

Security Type 7: PEAP

Additional parameters that need to be set and the SGD commands to use:

• user ID (see wlan.username on page 207)

• password (see wlan.password on page 187)

Security Type 8: LEAP

Additional parameters that need to be set and the SGD commands to use:

• user ID (see wlan.username on page 207)

• password (see wlan.password on page 187)

Security Type 9: WPA PSK

Additional parameters that need to be set and the SGD commands to use:

• Pre-Shared Key (PSK) value (see wlan.wpa.psk on page 215)

Example • This example configures the printer for PEAP authentication, including a user ID

with a value of “user” and a password with a value of “password.”

! U1 setvar "wlan.security" "7"

! U1 setvar "wlan.username" "user"

! U1 setvar "wlan.password" "password"

Example • This example configures the printer for LEAP authentication, including a user ID

with a value of “user” and a password with a value of “password.”

! U1 setvar "wlan.security" "8"

! U1 setvar "wlan.username" "user"

! U1 setvar "wlan.password" "password"

Note • Configuring the printer for WPA also allows the printer to be used in WPA2

environments. Key rotation for WPA2 PSK is supported in firmware version V60.15.7Z,

V53.15.7Z, R6x15.x, R53.15.x, ZSPx, and later.

Example • This example configures the printer for WPA PSK authentication with a PSK

value of all zeroes (64 hexadecimal digits).

! U1 setvar "wlan.security" "9"

! U1 setvar "wlan.wpa.psk" "00000000..."

1 2 ... 192 193 194 195 196 197 198 199 200 201 202 ... 227 228

Pas de commentaire

Zebra Wireless Print Server Guide de l'utilisateur Page 197