Zebra Wireless Print Server Guide de l'utilisateur Page 131

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 228
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 130
131
SGD Commands for Wireless Operation
ip.addr
4/29/08 Wireless User Guide 14143L-005 Rev. A
ip.addr
Description This command allows you to get or set the printers IP address.
Type getvar; setvar
This table identifies the commands for this format:
Important • For a set IP address to take affect, the IP protocol must be set to permanent and
the print server must be reset.
Commands Details
getvar
This command instructs the printer to respond with its current IP address.
Format: ! U1 getvar "ip.addr"
setvar
This command instructs the printer to change its current IP address upon
powering the printer on.
Format: ! U1 setvar "ip.addr" "value"
Va lues : any valid IP address
Default: "0.0.0.0"
Note • The setvar value of this command can be affected by the ip.dhcp.enable
command.
Example • This setvar example shows the value set to "10.14.4.235".
! U1 setvar "ip.addr" "10.14.4.235"
What the setvar value is set to is the getvar result. In this example, the getvar result is
"10.14.4.235".
Vue de la page 130
1 2 ... 126 127 128 129 130 131 132 133 134 135 136 ... 227 228

Commentaires sur ces manuels

Pas de commentaire