Zebra II Spécifications télécharger pdf (Page 12)

Example: When the command is best clarified in context, an example of the ZPL II

code is provided. Text indicating exact code entered by the user is printed in an

easily recognizable Courier font. An example of code using the ^B8 command

would look like this:

^XA

^FO50,50

^B8N,100,Y,N

^FD1234567^FS

^XZ

Notice

that the ^B8 parameter letters have been replaced with real values that apply

to the command. In this example, N, 100, Y, N have been entered.

Comments: This section is reserved for notes that are of value to a programmer,

warnings of potential command interactions, or command-specific information that

should be taken into consideration. An example comment could be: This command

only works when the printer is idle or This command is ignored if a value exceeds the

parameter limits.

Comments are also included next to parameters if they are directly applicable to a

particular setting.

A complete listing of ZPL II commands for the X.10 firmware begins on page 6.

ZPL II Programming Guide Volume One: Command Reference for X.10

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 261 262

Pas de commentaire

Zebra II Spécifications Page 12