Zebra II Spécifications télécharger pdf (Page 205)

^MD

Media Darkness

Description: This ^MD command adjusts the darkness relative to the current

darkness setting. The minimum value is -30 and the maximum value is 30.

Format: ^MDa

Parameters:

a = media darkness level

Accepted Values: -30 to 30, depending on current value.

Initial Value at Power-up: 0

If no value is entered, this command is ignored.

Examples:

• If the current value (value on configuration label) is 16, entering the command ^MD-9

would decrease the value to 7.

• If the current value (value on configuration label) is 1, entering the command ^MD15

would increase the value to 16.

• If the current value (value on configuration label) is 25, entering the command

^MD10 would only increase the value to 30 since that is the maximum value allowed.

Each ^MD command is treated separately in relation to the current value as printed

on the configuration label.

For example, this is what would happen if two ^MD commands were received.

Assume the current value is 15. An ^MD-6 command is received that changes

the current value to 9. Another command, ^MD2, is received. The current value

is changed 17. The two ^MD commands were treated individually with respect

to the current value of 15.

ZPL II Programming Guide Volume One: Command Reference for X.10

197

1 2 ... 200 201 202 203 204 205 206 207 208 209 210 ... 261 262

Pas de commentaire

Zebra II Spécifications Page 205